Patches for Analyst are listed below. These are usually zipped replacements for dlls, but will sometimes include an installation script, so read the instructions prior to downloading/installing. Unless otherwise noted higher number patches include lower number patches, so it is not necessary to separately install all patches with numbers less than the desired patch.
|
Patch Identifier
|
Product
Version
|
Description
|
Installation
Instructions
|
Download
|
|
Patch 1
|
Brings 10.5.0.0 up to 10.5.3.0
|
See Notes for more details. |
link
(3,649,894 bytes)
|
|
|
Patch 4
|
Brings 10.1.21 up to 10.1.22
|
See Notes for more details. If you have not already installed previous patches, please install them before installing Patch 4. All four patches are needed to bring the original release of V10 on May 25, 2007 up to 10.1.22. |
link
(3,438,590 bytes)
|
|
|
Patch 3
|
Brings 10.1.20 up to 10.1.21
|
See Notes for more details. If you have not already installed Patches 1 and 2, please install them before installing Patch 3. All three patches are needed to bring the original release of V10 on May 25, 2007 up to 10.1.21. |
link
(6,407,965 bytes)
|
|
|
Patch 2
|
Brings 10.1.18 up to 10.1.20
|
See Notes for more details. Please install Patch 1 and then Patch 2 (both are needed to bring the original release of V10 on May 25, 2007 up to 10.1.20). |
link
(3,487,162 bytes)
|
|
|
Patch 1
|
Brings 10.1.16 up to 10.1.18
|
See Notes for more details. |
link
(10,497,574 bytes)
|
|
|
Patch 3
|
9.0
|
See Notes for more details. |
link
(9,006,768 bytes)
|
|
|
Patch 2
|
9.0
|
See Notes for more details. |
link
(5,934,473 bytes)
|
|
|
Patch 1
|
9.0
|
Fixes an exit hang in the mesher, as well as other issues. See Notes for more details. |
link
(4,892,383 bytes)
|
Privacy Contact Webmaster Copyright © 1999-2006 by Simulation Technology & Applied Research, Inc. All rights reserved.